Job Responsibilities:

1. Responsible for module and chip Synthesis, DFT-insertion, scan-insertion, Formal verification, UPF low-power check, etc.;

2. Module and scan/atpg/mbist work;

3. Delivered comprehensive backdoor level netlists and sdc to P&R, assisted P&R colleagues to solve the timing convergence problem in the design.

Job Requirements:

1. Master degree or above, major in microelectronics or related, more than 3 years digital back-end working experience;

2. Familiar with DCS / Formality /PrimeTime Genus / LEC / Tempus EDA tools;

3. Familiar with TCL / perl / shell / python / makefile tool such as programming, ability to script the strong preferred;

4. Familiar with SOC DFT designer preferred;

5. Familiar with Low Power Design designers is preferred;

6. Good communication skills and teamwork spirit, strong independent working ability and practical ability.

Job Responsibilities:

1. Design and simulation of analog IP;

2. Simulation and verification of digital-analog mixed signal;

3. Guide layout engineers to complete layout design and conduct post-simulation;

4. Chip test and debug.

Job Requirements:

1. Master degree or above, major in microelectronics or related, more than 10 years experience in analog IC design;

2. Have the ability to define and market planning for car gauge products and industrial control products;

3. Strong design experience in analog circuits or discrete device such as PMU(DC-DC/LDO/Charger);

4. Experience in ADC/DAC/PLL/Bandgap/LDO analog circuit design;

5. Familiar with 40/28nm process and strong experience in BCD process design;

6. Successful R&D and mass production experience in 2 or more mainstream FAB analog flows such as SMIC, TSMC, etc.；

7. Experience in low power design is preferred;

8. Experience in operation and management of analog chip business unit is preferred.

Job Responsibilities:

1. Design and simulation of analog IP;

2. Simulation and verification of digital-analog mixed signal;

3. Guide layout engineers to complete layout design and conduct post-simulation;

4. Test and debug the chip.

Job Requirements:

1. Master degree or above, major in microelectronics or related, more than 5 years analog IC design experience;

2. Experience in ADC/DAC/PLL/Bandgap/LDO analog circuit design;

3. Familiar with 40/28 nm process;

4. Experience in low power ADC/DAC design is preferred.

Job Responsibilities:

1. Design and simulation of analog IP;

2. Simulation and verification of digital-analog mixed signal;

3. Guide layout engineers to complete layout design and conduct post-simulation;

4. Test and debug the chip.

Job Requirements:

1. Master degree or above, major in microelectronics or related, more than 5 years analog IC design experience;

2. Experience in analog circuit design such as PMU(DC-DC/LDO/Charger);

3. Familiar with 40/28 nm process;

4. Experience in PMU design in SoC is preferred.

Job Responsibilities:

1. Complete code conversion, verification and integration from ASIC RTL to FPGA;

2. Completed the generation of FPGA configuration file, supported the simulation, debugging and problem analysis of FPGA;

3. According to project requirements, write the underlying driver function of the project with C language or assembly language, and complete the simulation and debugging of the driver function on FPGA platform;

4. Assisted in IP design and EDA verification, as well as system software development and testing.

Job Requirements:

1. Full-time bachelor degree or above, major in microelectronics, computer or related field, more than 3 years working experience in this field;

2. Proficient in Xilinx FPGA development and debugging process, master FPGA development software such as ISE, Vivado, Synplify, etc.;

3. Proficient in C language, capable of developing and debugging the underlying driver of ARM Cortex-M series;

4. Familiar with Verilog hardware description language and scripting languages such as Python and Makefile;

5. Skilled in using common test instruments to assist hardware system debugging, familiar with the working principle and debugging methods of common single-chip peripherals, such as UART, I2C, SPI, I2S, USB, etc.

Job Responsibilities:

1. Define validation strategy, prepare IP, subsystem and chip validation plan;

2. Establish subsystem and chip-level verification environment, including the use of third party VIP;

3. Use System Verilog and C/C++ language to develop verification force, analyze and locate the causes of use case failure, and find the root cause;

4. Understood the system architecture, created typical force and performance use cases of the system, and understood the system architecture;

5. Familiar with low power verification process, create and run low power use cases;

6. Collect coverage to ensure convergence of function coverage and code coverage;

7. Cooperated with the software team for debugging on FPGA platform.

Job Requirements:

1. Full-time bachelor degree or above in microelectronics/computer or related major, more than 5 years of chip verification experience;

2. Knowledge of Verilog/System Verilog/C/C++ language, familiar with Python scripting language;

3. Familiar with VMM/OVM/UVM verification architecture, able to independently build SoC and IP-level verification environment;

4. Have strong initiative and teamwork spirit, and take the initiative to solve problems.

Job Responsibilities:

1. Define authentication strategy, prepare IP, and subsystem verification plan;

2. Establish the verification environment of subsystems, including the use of third-party VIP;

3. Use System Verilog and C/C++ language to develop verification force, analyze and locate the causes of use case failure, and find the root cause;

4. Understood the system architecture, created typical force and performance use cases of the system, and understood the system architecture;

5. Familiar with low power verification process, create and run low power use cases;

6. Collect coverage to ensure convergence of function coverage and code coverage;

7. Cooperated with the software team for debugging on FPGA platform.

Job Requirements:

1. Full-time bachelor degree or above in microelectronics/computer or related major, more than 2 years of chip verification experience;

2. Knowledge of Verilog/System Verilog/C/C++ language, familiar with Python scripting language;

3. Familiar with VMM/OVM/UVM authentication architecture, able to independently build IP-level authentication environment;

4. Have strong initiative and teamwork spirit, and take the initiative to solve problems;

5. Relevant knowledge in the following fields is preferred:

① Knowledge and experience of SoC based on ARM CPU;

② Familiar with AMBA AXI/AHB/APB protocol knowledge;

③ Familiar with interface IP such as UART/SPI/I2C/CAN/LIN;

④ Experience in low power and complex SoC clocks, reset and power control.

Job Responsibilities:

1. Responsible for the design and verification of IP module;

2. Complete chip level IP integration;

3. Complete chip-level synthesis and verification;

4. Assisted in FPGA verification and chip testing.

Job Requirements:

1. Master degree or above in microelectronics or electronic engineering, more than 3 years working experience in this field;

2. Good logical thinking ability, communication and expression ability, learning ability and teamwork ability;

3. Practical working attitude and inquiring spirit, solid knowledge of chip design and proficient in relevant design tools;

4. Relevant knowledge in the following fields is preferred:

① Familiar with the design of car gauge chip;

② Familiar with the design of security chip, data encryption and decryption algorithm and related data processing process;

③ Experience in low power design.

Job Responsibilities:

1. Develop embedded control software for hardware products according to product requirements;

2. Communicate with customers about product requirements, analyze and solve test problems feedback from customers;

3. Write the design document of the software module.

Job Requirements:

1. Full-time bachelor degree or above, major in computer, electronic information engineering, physics, etc;

2. Experience in the development and debugging of embedded products such as microcontroller, Cortex-M0/M3/M4;

3. Familiar with C/C++ and embedded development environment such as Keil/MDK/VSCode;

4. Experience in embedded Linux software development is preferred;

5. Good communication skills and written expression skills.

Job Responsibilities:

1. Responsible for the automatic layout and wiring design of digital chips, and completed the design and implementation from Netlist to GDS;

2. Cooperated with front-end design and analog layout engineers to complete the overall chip layout planning;

3. Be responsible for timing analysis and optimization, and cooperate with front-end personnel to achieve timing convergence;

4. Complete physical verification of the layout.

Job Requirements:

1. Full-time bachelor degree or above, major in microelectronics, more than 5 years of digital back-end working experience;

2. Familiar with PR/PV/Signoff tools of mainstream EDA manufacturers;

3. Proficient in digital back-end design process;

4. Experience in successful mass production chip design;

5. Familiar with Tcl/Perl/Shell/Python/Makefile tool such as programming, ability to script the strong preferred;

6. Experience in 28nm or 40nm design is preferred;

7. Good communication skills and teamwork spirit, strong independent working ability and practical ability.

Job Responsibilities:

1. Responsible for the product introduction and promotion of the company's MCU product line, storage product line, voice product line and other collaborative sales on the client side, mined new project opportunities for customers and followed up existing projects;

2. Conducted system-level product development and function-level debugging, and conducted research and analysis on competitors' system-level products and chips;

3. Provide professional technical support, work closely with customers and sales team to solve technical problems, so as to achieve sales;

4. Able to understand and propose appropriate solutions according to customers' needs, and give timely feedback;

5. Conducted on-site testing and troubleshooting for customers' practical applications, and timely helped customers solve product design and application problems;

6. Provided technical training to customers and sales staff of the company.

Job Requirements:

1. Full-time bachelor degree or above, major in electronics, communications, control or related major; At least 3 years relevant working experience, 1 year or more embedded system development and debugging experience in ARM Cortex kernel, FAE working experience;

2. Familiar with MCU product application, with MCU scheme selection and schematic diagram design ability;

3. Proficient in embedded C language programming, familiar with common peripherals of single chip microcomputer (SPI/I2C/CAN/ADC/PWM), experience in motor drive development is preferred;

4. Knowledge of  Linux development, FreeRTOS/ucos-ii/RT-Thread, Ethernet drivers, USB drivers, DDR drivers, etc. a plus;

5. Knowledge of the various required for system-level product development is a plus.

Job Responsibilities:

1.Promoted and sold the company's self-developed product line, and promoted and sold the products of strategic partners;

2.Sales and promotion of separated devices, WiFi, Bluetooth, MCU, Memory, backlight driver and other chips;

3.Actively explore new markets, develop new customers and expand customer groups;

4.According to the requirements of the department, complete the quarterly and annual sales targets of individual and team;

5.Maintained customer relations and consolidated long-term cooperation plans with customers;

6.Responsible for the collection and feedback of regional market information and competitors.

Job Requirements:

1.Junior college degree or above, more than 2 years working experience, love market business activities, willing to develop in the semiconductor field for a long time;

2.Working experience in electronics/semiconductor industry, with industry resources is preferred;

3.Willing to constantly learn new knowledge, honest, dedicated and responsible, self-drive and execution strong, able to handle problems independently; Excellent communication and coordination skills and team work spirit.

Job Responsibilities:

1. Responsible for the establishment and maintenance of the whole company's quality system (ISO9001, IATF16949);

2. Led the construction and introduction of quality system (ISO26262);

3. Responsible for the preparation of the company's internal quality audit (internal audit) and management review;

4. Responsible for contacting and executing all external quality system audits (third parties).

Job Requirements:

1. Full-time bachelor degree or above, major in computer, communication, electronics, etc., more than 3 years of quality management experience in electronics industry;

2. Experience in independently implementing the company's ISO9001 quality system operation and auditing;

3. Familiar with AEC-Q100 quality system and reliability test standards;

4. Working experience in semiconductor design company and supply chain design company, or certification experience in automotive electronics related system is preferred;

5. Good analytical, organizational, communication and coordination skills, good quality project management and promotion ability.